
Add to Cart
RG-S350 is a high-performance enterprise outdoor bridge that works in the 5G band and supports 802.11ac technology.
It is equipped with two 10/100Mbps network interfaces and 5G 802.11ac wireless processing speed up to 300Mbps. Built-in 14dBi high gain, wide angle directional panel antenna, easy and fast installation.
Attributes | Details |
---|---|
Main Chip | High Performance Enterprise Chip ( AR9344) |
Main Frequency | 580MHz MIPS® 24KEc™ Central Processing Unit |
Wireless Technology | 5G:450M 802.11a/n/ac 1T1R technology |
Memory | 64MByte DDR2 |
Flash | 8MB |
Network Interface | 2*10/100Mbps Adaptive RJ45 Network |
Button | 1 * digital switch / reset button, short press the digital tube display value +1, long press for 5 seconds to restore factory settings Master-slave dip switch: master for access point mode, slave for client mode |
Indicator lights | Signal SIG indicator, ETH network interface status indicator, power indicator, system indicator, digital tube indicator |
Power supply | 24V 1A non-standard PoE power supply; DC 12V 1A, power consumption﹤10 W |
Working Environment | Temperature: -30℃~+55℃(working), -40℃~+70℃(storage) Humidity (non-condensing): 10%~90% (working), 5%~95% (storage) |
Antenna | Built-in high-gain 14dBi directional plate antenna (horizontal wave half-angle 60°, vertical wave half-angle 15°) |
Frequency range | ISM band: 4.900GHz ~ 5.850 |
Channel | 5G:36,40,44,48,52,56,60,64,100,104,108,112,116,120,124, 128,132,136,140,149,153,157,161,165 |
Modulation method | OFDM = BPSK,QPSK,16-QAM,64-QAM,256-QAM;DSSS = DBPSK,DQPSK |
Output power | 11a @54M:20±2dB, @6M:23±2Db 11n 20MHz:@MCS9:20±2dB, @MCS0:23±2dB 11n 40MHz:@MCS9:20±2dB, @MCS0:23±2dB 11ac 40MHz @MCS9:20±2dB, @MCS0:23±2dB 11ac 80MHz @MCS9:20±2dB, @MCS0:23±2Db |
Reception sensitivity | 11a: <-72dbm@54Mbps, <-89dbm@6Mbps 11n 20MHz: <-71dbm@MCS8, <-89dbm@MCS0 11ac 40MHz:<-66dbm@MCS9, <-84dbm@MCS0 11ac 80MHz: <-63dBm@MCS9 <-81dBm@MCS0 |
EVM | 802.11n: ≤-28 dB 802.11a: ≤-25 dB |
Frequency | <±20ppm |
Working mode | Master AP (bridge access point), slave AP (bridge client), switch by dip switch |
Networking method | Point-to-point, point-to-multipoint (up to 8 points) |
Management style | Chinese WEB Remote Management |
Bridge configuration | Wireless mode: Bridge access point, bridge client switching Bridge access point: Bridge SSID, encryption method (WPA2-PSK, WPA-PSK, no encryption), bridge password, wireless protocol,Wireless bandwidth, wireless channel, wireless power (100%, 75%, 50%, 25%, 10%, 5%) Bridge Client: Bridge SSID, encryption method (WPA2-PSK, WPA-PSK, no encryption), bridge password, MAC address lock at the other end, wireless channel, wireless power (100%, 75%, 50%, 25%, 10%, 5%) |
Network settings | Static IP/Dynamic Acquisition |
System | Login password change, factory restore, local upgrade |